EMC实验室规范

The rule of the EMC lab

为保证EMC实验工作的顺利展开，避免人身安全与设备安全受到损害，本实验室操作者都必须遵守以下的安全操作规程：

In order to ensure smooth conduct of EMC experimental work, personal safety and safety equipment to avoid damage, the operator of the laboratory must follow the following safety rules：

1. 实验室设备能正常运作及经过完全校准.

The proper functioning of laboratory equipment and fully calibrated.

2. EMC实验室按功能划分为Surge测试区，EFT测试区，ESD测试区. EMC test laboratory is divided into areas for Surge, EFT and ESD.

3. 使用仪器前，应先检查仪器设备供电情况是否正常，引线有无破损/漏电/短路现象，接地是否正常，确保无误后再接通电源.

Using the instruments, equipment should be checked whether the normal power supply, lead without damage / leakage / short circuit, earth is normal, and then to ensure correct power.

4. 严格的按照仪器操作规程，正确操作仪器. 在使用设备过程中，一旦有事离开必须请他人代为看管并应有标牌警示.

Strictly in accordance with instrument procedures, proper instrument operation. When the technician leavers the lab, the test in process should be add with “CAUTION”.

5. 实验过程中被测品必须置于安全罩内，防止安全隐患.

Experiment tested products must be placed inside the safety cover to prevent security risks.

6. 仪器设备严禁擅自拆卸或改装.

Equipment removal or modification is strictly prohibited without permission.

7. 设备在使用过程中若出现异常，应及时通知相关人员。

If equipments do not work ordinarily in test, please inform the people concerned as soon as possible.

8. 实验完毕，要关闭设备的电源，并检查所有电路是否完全关闭，

清理整理