YAGEO CORPORATION ALUMINUM ELECTROLYTIC CAPACITORS

SE-K[ For General] 105 C Single-Ended Lead Aluminum Electrolytic Capacitors Rated Voltage up to 450V

Miniature Size Aluminum Electrolytic Capacitors

ELECTRICAL CHARACTERISTICS Operating Temperature: -40~+105ºC/ -25~+105 C Working Voltage: 6.3~ 250V/ 350~ 450V Rate Capacitance Range: 0.47~ 15000 F/ 0.47~ 150 F Capacitance Tolerance: -20~+20% DC Leakage Current ( A): I= 0.01CV+ 3/ 0.03CV+ 10 ( After 2 Minutes Application of DC Working Voltage at 25 C ) Dissipation Factor: at 120 Hz, 25 C W V (V): 6.3 10 16 25 35 50 63 80 100 160~ 250 350~ 450 D.F (%): 26 22 18 16 14 12 10 10 10 15 20 For capacitor whose capacitance excceds 1000 F. The value of DF(%) is increased by 2% for every addition of 1000 F. Load Life: 1000 Hours at Assured with Full Rated Maximum Ripple Current Applied (a) Capacitance Change: Within 20% of Initial Value (b) Dissipation Factor: Not Exceed 200% of Initial Requirement (c) Leakage Current: Not Exceed the Initial Requirement Shelf Life: 500 Hours, No Voltage Applied (a) Capacitance Change: Within 20% of Initial Value (b) Dissipation Factor: Not Exceed 200% of Initial Requirement (c) Leakage Current: Not Exceed 200% of Initial Requirement

DESCRIPTION Lower-cost capacitors expressly intended for high density printed circuit board. Very High Volumetric Efficiency Ideally suited for general-purpose applications, coupling, decoupling, by pass, and filtering circuit in entertainment electronics. Feature High CV Product with Moderate Cost Multiplier for Ripple Current Frequency coefficient Frequency (Hz) 120 300 6.3~100V Below~68 F 1.00 1.20 6.3~100V 100~680 F 1.00 1.10 6.3~110V 1000~22000 F 1.00 1.05 160~450V ALL Cap( F) 1.00 1.05 Temperature coefficient Temperature( C) Factor 65 1.80 85 1.40 105 1.00

1K 10K~100K 1.30 1.45 1.15 1.25 1.10 1.15 1.10 1.50

DIAGRAM OF DIMENSIONS Dø 4.0 5.0 6.0 8.0 10.0 12.0 13.0 16.0 18.0 22.0 F 1.5 2.0 2.5 3.5 5.0 dø 0.45 0.5 Vinyl Sleeve (P.V.C) Rubber End Seal

Dimensions: mm Rubber Stand-off Vinyl Sleeve (P.V.C) Rubber End Seal

F 0.5

F 0.5

0.6 L 0.4Max. 15Min. 5Min. D 0.5 L 15Min. 5Min. D 0.5

7.5 10.0

0.8 0.8

L 12 13 L 15 L 16

L+ 1.5Max. L -0.5 L+ 2.0Max. +1.0